SINAMICS G120D 380-500V, 3.00kW - Frequency converter 380...500V 3kW 6SL3525-0PE23-0AA1

SINAMICS G120D 380-500V, 3.00kW - Frequency converter 380...500V 3kW 6SL3525-0PE23-0AA1 – Siemens – 4019169458603: SINAMICS G120D 380-500 V, 3.00 kW 6SL3525-0PE23-0AA1 Mains voltage 380 ... 500 V, mains frequency 50/60 Hz, number of input phases 3, number of output phases 3, max. output frequency 650 Hz, rated output current I2N 7.7 A, max. output power at square. Load at a rated output voltage of 3kW, Max. power output with a linear load at a rated output voltage of 3kW, Relative symmetrical mains frequency tolerance 10%, Relative symmetrical mains voltage tolerance -10%, Can be used in the industrial sector, Brake chopper integrated, 4-quadrant operation possible, Type of converter U converter, Degree of protection (IP) IP65, height 210mm, width 445mm, depth 180mm, SINAMICS G120D Power Module PM250D with integrated class A filter capable of energy recovery 3AC380-480V+10/-10% 47-63Hz power high overload: 3.0kW at 200% 3S , 150% 60S, 100% 300S Ambient temperature -10 to +55°C 210x 450x 180 (HxWxD), FSB degree of protection IP65 without Control Unit Power Module SINAMICS Power Module PM250D for the distributed converter SINAMICS G120D. Thanks to the regeneration capability of the PM250D Power Module in generator mode (electronic braking), energy is fed back into the network and not converted into heat in a braking resistor. This saves energy, space, the complex design of the braking resistor and its wiring. In addition, the heat generated is reduced. Furthermore, an innovative circuit technology ensures less harmonic mains harmonics. There is no need for a mains choke, which saves space and effort in project planning and procurement. In addition, the PM250D Power Module is suitable for use in safety-related applications; in conjunction with a fail-safe control unit, the drive becomes a Safety Integrated Drive. The PM250D Power Modules are available in frame sizes FSA to FSC in a three-phase voltage range from 380 V to 500 V and in a power range between 0.75 kW and 7.5 kW. These PM250D Power Modules with integrated class A line filter are suitable for connection to TN and TT systems. SINAMICS - the integrated drive family for every area of application.