Power Module 1, 1kW at 200% - Frequency converter 380...480V 1,5kW 6SL3210-1PE14-3UL1

Power Module 1, 1kW at 200% - Frequency converter 380...480V 1,5kW 6SL3210-1PE14-3UL1 – Siemens – 4042948665978: Power Module 1.1kW at 200% 6SL3210-1PE14-3UL1 Mains voltage 380 ... 480V, mains frequency 50/60 Hz, number of input phases 3, number of output phases 3, max. output frequency 550Hz, max. output voltage 400V, rated output current I2N 4.1A, max. power delivered at square. Load at a rated output voltage of 1.5kW, Max. power output with a linear load at a rated output voltage of 1.1kW, Relative symmetrical mains frequency tolerance 5%, Relative symmetrical mains voltage tolerance -10%, Supports protocol for PROFINET IO, Supports protocol for EtherNet/IP, Supports protocol for PROFIsafe , Number of HW interfaces serial TTY 0, With PC connection, brake chopper integrated, Type of converter U converter, degree of protection (IP) IP20, height 196mm, width 73mm, depth 165mm, SINAMICS Power Module PM240-2 unfiltered with integrated brake -Chopper 3AC380-480V+10/-10% 47-63Hz power high overload: 1.1kW at 200% 3S, 150% 57S, 100% 240S ambient temperature -10 to +50°C, power low overload: 1.5kW at 150% 3S, 110% 57S, 100% 240S Ambient temperature -10 to +40°C 196x 73x 165 (HxWxD), FSA degree of protection IP20 without Control Unit and operator panel released from CU firmware version V4.6 Power Module SINAMICS Power Module PM240- 2 the ideal power Modules for standard applications in mechanical engineering for the modular SINAMICS G120 frequency converter. As part of the modular SINAMICS G120 frequency converter (consisting of power unit, control unit, operator panel), the PM240-2 Power Modules (degree of protection IP20) have a brake chopper (four-quadrant applications) and are suitable for a large number of applications in general mechanical engineering suitable. The PM240-2 power section can be flexibly combined with various control units, depending on the scope of the application and safety requirements (e.g. STO, SS1, SBC, SLS, SDI, SSM). In combination with the CU230-2, CU240x-2 and CU250S-2 Control Units, the functional SINAMICS G120 frequency converter results. The PM240-2 with degree of protection IP20 is a built-in device for the control cabinet in a power range from 0.55 kW to 250 kW, as well as the three voltage variants 200 V, 400 V and 690 V. The power modules are unfiltered or with an integrated line filter class A and in the seven sizes from FSA to FSG. The power unit is also available as a push-through variant for optimal dissipation of heat loss outside the control cabinet. The sizes also offer Safety Integrated. Due to the robust design, cable lengths of up to 450 meters (size FSF/FSG) can be achieved. Shield plates and shield connection kits are available for EMC-compliant wiring. SINAMICS - simply my drive.