ET 200 per DSE HF direct starter high - Direct starter combination 5,5kW 3RK1304-5LS40-2AA0

Siemens - 3RK1304-5LS40-2AA0 - ET 200 per DSE HF direct starter high - Direct starter combination 5,5kW 3RK1304-5LS40-2AA0
Photo source: fig. possibly similar
Photo source: fig. possibly similar
3RK1304-5LS40-2AA0 4011209659933 EAN/GTIN DE 23691322 WEEE

$640.21 incl. VAT ($0.00)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Direct starter combination 5,5kW Kind of motor starter Direct starter, With short-circuit... more
ET 200 per DSE HF direct starter high - Direct starter combination 5,5kW 3RK1304-5LS40-2AA0 – Siemens – 4011209659933: Direct starter combination 5,5kW Kind of motor starter Direct starter, With short-circuit release, Rated control supply voltage Us at DC 20,4 ... 28,8V, Voltage type for actuating DC, Rated operation power at AC-3, 400 V 5,5kW, Rated operation current Ie 12A, Rated operation current at AC-3, 400 V 12A, Overload release current setting 1,5 ... 12A, Release class CLASS 10, Type of electrical connection of main circuit Flat plug-in connection, Coordination class according to IEC 60947-4-3 Class 1, Degree of protection (IP) IP65, Width 110mm, Height 230mm, Depth 150mm
... more
Type of motor starter Direct starter (DOL)
With short-circuit release yes
Voltage type for actuation DC
Rated operating power at AC-3, 400V 5.5 kW
Rated operational current Ie 12 A
Rated operating current at AC-3, 400 V 12 A
Overload release Current setting 1.5..12 A
Trip class CLASS 10
Connection type main circuit Blade terminal
With transformer no
Assignment type according to IEC 60947-4-3 Class 1
IP protection) IP65
Supports protocol for ASI no
Width 110 mm
Height 230 mm
Depth 150 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "ET 200 per DSE HF direct starter high - Direct starter combination 5,5kW 3RK1304-5LS40-2AA0"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.