Electronics module - Fieldbus digital module 0 In / 8 Out 6ES7132-4BF00-0AA0

Electronics module - Fieldbus digital module 0 In / 8 Out 6ES7132-4BF00-0AA0 – Siemens – 4025515074670: Electronics module 6ES7132-4BF00-0AA0 supply voltage at AC 50 Hz 0V, supply voltage at AC 60 Hz 0V, supply voltage at DC 20.4 ... 28.8V, voltage type of the supply voltage DC, number of digital inputs 0, number of digital outputs 8, Digital outputs configurable, type of digital output other, output current 0.5A, permissible voltage at the output 17.4 ... 25.8V, type of output voltage DC, short-circuit protection, outputs available, number of HW interfaces Industrial Ethernet 0, number of interfaces PROFINET 0, number of HW interfaces serial RS-232 0, number of HW interfaces serial RS-422 0, number of HW interfaces serial RS-485 0, number of HW interfaces serial TTY 0, number of HW interfaces parallel 0, number of wireless HW interfaces 0, number of USB HW interfaces 0, number of other HW interfaces 0, system components, degree of protection (IP) IP20, design of the electrical connection screw/spring-loaded connection , delay time for signal change 0.3 ... 0.6ms, fieldbus connection possible via separate bus coupler, DIN rail mounting possible, wall/direct mounting possible, front mounting possible, explosion protection category for gas ATEX gas explosion protection, Cat. 3G, explosion protection Category for dust without, width 15mm, height 81mm, depth 52mm, electronics module for ET 200S, 8 DO DC 24V/0.5A, 15mm width, 1 piece per packaging unit The SIMATIC ET 200S is a modular, scalable, distributed I/O system, which designed especially for installation in small machine-near control boxes. The modules can either be plugged directly into an ET 200S IM with CPU functionality or connected to a central controller via PROFINET or PROFIBUS. The SIMATIC ET 200S can be expanded with up to 64 I/O modules, which can be plugged in in any combination. The system offers a wide range of assemblies. Many modules are also available in different versions, which significantly improves scalability in terms of functionality and price. In addition to modules with standard functionality (ST), modules with an extended range of functions and diagnostics (HF High Feature/ HS High Speed) are also available. The advantage of the ET 200S system is that it is easy to use, e.g. B. by the possibility to change modules and terminal boxes during operation. The so-called hot swapping significantly increases machine availability and productivity.