Butt connector PSVSSI1525 1.5-2.5mm insulated 05104516

PROTEC.class - 05104516 - Butt connector PSVSSI1525 1.5-2.5mm insulated 05104516
Photo source: fig. possibly similar
05104516 PSVSSI1525 4016705145164 EAN/GTIN DE 67920185 WEEE

Our best price
$76.78 incl. VAT ($0.00)
(For 100 Piece) plus shipping

4-5 days* (USA)

x 100 Piece
Add to wish list
Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
For solid conductors / domestic installation, Cu-ETP according to DIN EN13600, galvanized Sn,... more
Butt connector PSVSSI1525 1.5-2.5mm insulated 05104516 – PROTEC.class – PSVSSI1525 – 4016705145164: For solid conductors / domestic installation, Cu-ETP according to DIN EN13600, galvanized Sn, two-layer insulation with thermoplastic inner adhesive, after shrinking a waterproof connection is created, shrinkage temperature: +100°C, dielectric strength: 30 kV/mm, elongation strength 27 MPa, expansion 450 %, length change max. 10%, gravity (density ratio) 0.95 cm³, cross section: 1.5 - 2.5 mm², color: blue, suitable tool: PCSV crimping pliers
... more

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Butt connector PSVSSI1525 1.5-2.5mm insulated 05104516"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.