Hanging support, U-profile 43, 5x29, 5x201mm - Ceiling profile for cable tray 201mm HU 4530/200 FL

Hanging support, U-profile 43, 5x29, 5x201mm - Ceiling profile for cable tray 201mm HU 4530/200 FL – Niedax – 4013339164820: Hanging support, U-profile 43.5x29.5x201mm HU 4530/200 FL length 201mm, profile width 30mm, profile height 45mm, design U-profile, load capacity 2kN, material steel, material quality other, surface hot-dip galvanized, color without, hanging support, 3-sided perforated U-profile with welded head plate, system HU 4530/..., for brackets for one-, two- and three-sided laying, to prevent deformation of the hanging support profile when mounting brackets, is the hanging support spacer profile HDS 45.30 for static reasons F with a hexagonal screw must be taken into account. If the bracket is attached to the hanging support profile on one side, the closed side of the bracket should preferably be attached flush with the profile web of the hanging support. For static reasons and to enable the protective cap to be put on without any problems, the bracket must be mounted at a distance of x=50 mm (bottom edge of bracket to end of hanging support) above the end of the hanging support. for cantilever: KTAL... KTAM... = 400 mm KTA... = 400 mm Dimensions (approx. dimensions) Head plate L x W x D: 130 x 40 x 5 mm Fixing holes: 11 x 20 mm Center distance: 100 mm Top plate perforation in the middle: 11 x 20 mm 15 mm from the side edge U-profile: 43.5 x 29.5 x 29.5 mm Material thickness t: 2 mm Distance from three-sided profile perforation to the head plate: 123 mm three-sided profile perforation, single row: 11 x 30 mm in the centre Distance: 50 mm Total length L: 201 mm Material: Steel, hot-dip galvanized according to DIN EN ISO 1461