Inductive proximity switch 8mm DC5...60V 110149

Inductive proximity switch 8mm DC5...60V 110149 – Metz – 4250184120285: Proximity switch inductive 2-wire 110149 Length of the sensor 40mm, diameter of the sensor 18mm, switching distance 8mm, number of semiconductor outputs with signaling function 1, number of contact-based outputs with signaling function 0, number of safe semiconductor outputs 0, number of safe contact-based outputs 0 , Max. output current at the safe output 100mA, supply voltage 5 ... 60V, rated control supply voltage Us at DC 5 ... 60V, switching frequency 500Hz, The sensor consists of a cylindrical, nickel-plated metal body with M18 thread and 2 flat nuts. The cable exit is located opposite the front surface. On the side is the yellow LED, which lights up when dimmed. A high-frequency electromagnetic field is generated in the oscillator and emerges from the front surface of the sensor. It forms a spatial area above the active area, which is referred to as the active switching zone. If an electrically conductive material enters the field, energy is withdrawn from the oscillator. This dampens the vibrations to such an extent that they stop completely or largely. If the conductive material is removed from the active zone, the oscillator can oscillate at full amplitude again. These two states can be evaluated electronically with the DRIW-E16. The sensor contains the following essential components: 1. an oscillator (LC resonant circuit), 2. rectifier filter, 3. tilt amplifier, 4. power amplifier