Connector E-DAT REG 8(8) IP20 - DIN-rail adapter 1309426003-E

Connector E-DAT REG 8(8) IP20 - DIN-rail adapter 1309426003-E – Metz – 4250184106586: Connector E-DAT REG 8(8) IP20 1309426003-E Mounting type DIN rail TH35, design of the DIN rail adapter straight, material plastic, connection unit for mounting on TH35 DIN rail according to DIN EN 60715 in electrical distribution boards for domestic and industrial installations, equipped with an E-DAT module RJ45 single module, cable access 45° from above, plug-in direction inclined 45° downwards, compliance with class EA according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, tested: Link up to 500 MHz, Suitable for 10 GBit Ethernet (IEEE 802.3an), remote powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT, easy-to-install connection of the 2 to 4-pair data cable AWG 26/1 - 22/1 and stranded conductors with 7-wire Cu strand AWG 26/7 on BTR 8-fold IDC insulation displacement terminals, marking of the wire assignment T568A or T568B, easy and quick insertion of the wire pairs into the E-DAT module charging piece, the width of 1TE enables the installation of up to 12 REG in standard Electrical distributor, when installed as a device of protection class I, the potential equalization takes place via an integrated potential equalization plate directly via the mounting rail, which is connected to the building potential equalization via appropriate contact terminals. The module is protected from direct contact by a cover. When installed in protectively insulated distributors, protection class II remains. To do this, the potential equalization spring must be removed. Integrated dust protection flap (also available in color)