Connection socket C6Amodul UP0 1Port 270 UP0 - RJ45 8(8) Data outlet 6A (IEC) 130B12D11200-E

Connection socket C6Amodul UP0 1Port 270 UP0 - RJ45 8(8) Data outlet 6A (IEC) 130B12D11200-E – Metz – 4250184131892: Junction box C6Amodul UP0 1Port 270 UP0 130B12D11200-E flush-mounted, duct installation, type of fastening screws, combination of base element with adapter plate, connector type RJ45 8(8), with sockets/couplings, suitable for number of sockets/couplings 1, category 6A (IEC), connection type insulation displacement terminal IDC , Shielded sockets, shielded housing, suitable for design, separate cable strain relief, oblique outlet direction, with dust protection, color coding, device width 69.9mm, device height 69.9mm, device depth 40.5mm, channel connection unit with C6, Amodul 270°, GHMT Cat.6, A re-embedded PVP certified, Cat.6, A component testing according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT certified, compliance with Class E, A up to 500 MHz according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09 , tested: component up to 600 MHz, link up to 800 MHz, for 10GBit Ethernet (IEEE 802.3an), remote powering (PoE, PoE plus, UPoE and 4PPoE) and HDBaseT Suitable for connecting data lines AWG 26/1 - 22/1 (solid) and AWG 26/7 to 22/7 (stranded) to IDC insulation displacement terminals, plug-in direction of the module inclined downwards by 45°, strain relief with snap-in clip on the loading piece, compatible with Design center pieces from switch ranges (note that 3-port center pieces are currently only available from JUNG), suitable for installation in standard flush-mounted and hollow-wall cups, except for the 3-port variant!, variants: 1-port, 2-port, 3-port