Motion detector polar white KNX ARGUS 180/2.20m - KNX movement sensor 632719

632719 4042811080273 EAN/GTIN DE 33842582 WEEE

Our best price
$98.00 incl. VAT ($0.00)
$157.67 (-37.84% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Motion detector pws KNX ARGUS 180/2.20m 632719 bus system KNX, other bus systems without, design... more
Motion detector polar white KNX ARGUS 180/2.20m - KNX movement sensor 632719 – Merten – 4042811080273: Motion detector pws KNX ARGUS 180/2.20m 632719 bus system KNX, other bus systems without, design motion detector, mounting type flush-mounted, material plastic, material quality thermoplastic, surface untreated, design of the surface matt, color white, RAL number (similar) 9010, with bus coupling , creep-under protection/rear field monitoring, stairwell monitoring, response brightness adjustable, optimal installation height 2.5m, max. range to one side 8m, max. Number of binary inputs 0, min. duty cycle 1s, max. duty cycle 15300min, min. depth of the device socket 46mm, in the System M design. Motion detector for indoor areas with creep protection. When a movement is detected, a data telegram defined by the programming is sent. With integrated bus coupler. For wall mounting in a 60 mm installation box, optimal use at 2.2 m. KNX software functions: Five movement blocks: Up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes. Normal operation, master, slave, safety pause, locking function. Sensitivity, brightness and staircase lighting time can be set via the ETS or the potentiometer. Two motion sensors: Sensitivity and range can be set separately for each sensor. Learnable staircase lighting timexx Detection angle: 180 degrees. Range: 8 m right/left, 12 m forward (at a mounting height of 2.20 m). Mounting height: 2.2 m or 1.1 m with half the range. Number of levels: 6. Number of zones: 46. Number of motion sensors: 2, adjustable by sector. Sensitivity: continuously adjustable (ETS or potentiometer). Light sensor: continuously adjustable from approx. 10 to 2000 lux (ETS or potentiometer). Time: adjustable in steps from 1 s to 8 min (potentiometer) or adjustable from 1 s to 255 hours (ETS). EC directives: Low Voltage Directive 2006/95/EG and EMC Directive 2004/108/EG. Scope of delivery: With bus connection terminal and support plate. With cover segments to limit the detection area. Material: thermoplastic matt. Colour: polar white.
... more
Bus system KNX yes
Bus system KNX radio no
Bus system radio bus no
Bus system LON no
Bus system Powernet no
Other bus systems without
Radio bidirectional no
Execution Motion detector
Mounting Flush
Material Polycarbonate
Material quality Thermoplastic
Surface protection untreated
Execution of the surface frosted
Colour polar white
RAL number (similar) 9010
Transparent no
With bus coupling yes
Extension input no
Undercrawl / Rearfield yes
Mode switch no
Animal zone no
Staircase monitoring yes
Adjustable response brightness yes
Teach function for response brightness no
Off-delay self-learning no
Optimum mounting height 2.5 m
Max. Range to one page 8 m
Max. Range frontal 12 m
Detection field diameter on floor 16 m
Detection angle horizontal 0..180 °
Amount of channels 5
Minimum duty cycle 1 s
Max. Duty cycle 15300 min
Min. depth of the device socket 46 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "Motion detector polar white KNX ARGUS 180/2.20m - KNX movement sensor 632719"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.