Door speaker module video standard, 2 call buttons - Camera for intercom system 351200

Door speaker module video standard, 2 call buttons - Camera for intercom system 351200 – Legrand SEKO – 8005543441565: Standard video door loudspeaker module, 2 call buttons 351200 Installation type, installation technology 2-wire, material plastic, color other, color camera with integrated loudspeaker module with 2 call buttons for installing audio/video systems in 2-wire technology. Color camera with 1/3 inch sensor (image area 77 degrees horizontal/58 degrees vertical) including LEDs to illuminate the recording area and anti-fog heating (heating resistor). Two-axis alignment of the camera (horizontal and vertical) in the range of +/- 10 degrees. With speaker and microphone volume adjustment. For managing up to 98 call buttons via the Codelock/keypad module or with 2-row call button modules. Up to 49 call buttons are possible with 1-row call button modules. The door opener (max. 30 Ohm internal resistance) is connected directly to terminals S+ and S- (18 V 4 A surge current - 250 mA holding current). An external door release button (e.g. postal lock) can be integrated via the PL terminals. An additional power supply unit can be connected to terminals 1 and 2 (e.g. in large systems with several door stations). The device is equipped with several status LEDs that indicate the following operating states: door open, communication active, call made and system busy. Integrated brightness sensor to switch on the backlight automatically when it is dark. To be completed with the relative front panel. The device is configured either with configurators or via PC and software TiSferaDesign. Note: When using the left call button on the loudspeaker module or the 2-row call button modules, the jumper (J1) must be removed.