KNX LED Universal dimming actuator, 4-gang, 39004 1S R

KNX bus system yes, KNX radio bus system no, Radio bus system no, LON bus system no, Powernet bus system no, Other bus systems without, Bidirectional radio no, Dimming actuator version, REG mounting type, Width in division units 4, With bus coupling yes, Removable bus module no, Extension input no, local/manual operation yes, with LED display yes, number of outputs 4, output power 1..225 W, additional power can be used yes, load type universal and LED retrofit, max. control current 15 mA, voltage 110..230 V, Parallel operation possible yes, frequency 50..60 Hz, 4 x 225 W, HV LED lamps typ. 4 x 1 ... 35 W (leading edge), 4 x 1 ... 200 W (leading edge) 1 x 855 W REG housing 4 HP with electronic manual operation and LED status display Project planning and commissioning with ETS5 or newer, ETS product family lighting, product type dimmer

Intended Use
Switching and dimming of incandescent lamps, HV halogen lamps, dimmable HV LED lamps, dimmable compact fluorescent lamps, dimmable inductive transformers with LV halogen or NV LED lamps, dimmable electronic transformers with NV halogen or NV LED lamps
Mounting on top-hat rail according to DIN EN 60715 in sub-distributor

Product features
Outputs can be operated manually, construction site operation
Feedback in manual mode and in bus mode
Blocking individual outputs manually or by bus
Status feedback
KNX Data Secure compatible from ETS 5.7.3
Updateable with ETS service app

Features dimming operation
Automatic or manual setting of the dimming principle that suits the load
No-load, short-circuit and over-temperature proof
Message in the event of a short circuit, power failure and overload
Feedback of the switching status and the dimming value
Parameterizable switch-on and dimming behavior
Time functions: on/off delay, staircase light switch with advance warning function
Light scene operation
Status display of the outputs via LED
Operating hours counter
A power failure longer than approx. 5 seconds will result in the dimming actuator being switched off. Depending on the parameter setting, the connected load is recalibrated after voltage returns.
Increase in output power possible by connecting several outputs in parallel
Performance expansion possible through performance additions (Art. No. ULZ 1755 REG).
Optional accessories: LED compensation module, item no.: KM LED 230 U

Properties logic
Logic gates
Converter (conversion)
Locking member
Comparator
Limit switch

The device is KNX Data Secure compatible. KNX Data Secure offers protection against manipulation in building automation. A dedicated application is required for secure operation. Further information can be found at: KNX Secure, intended use, switching and dimming of incandescent lamps, HV halogen lamps, dimmable HV LED lamps, dimmable compact fluorescent lamps, dimmable inductive transformers with LV halogen or LV LED lamps, dimmable electronic transformers with LV halogen or LV LED lamps, mounting on top-hat rail according to DIN EN 60715 in sub-distribution, product features: Outputs can be operated manually, construction site operation, feedback in manual mode and in bus mode, blocking of individual outputs by hand or bus, status feedback, KNX Data Secure compatible from ETS 5.7.3, updateable with ETS service app, features dimming operation: Automatic or manual setting of the dimming principle that suits the load, no-load, short-circuit and over-temperature proof, notification in the event of a short circuit, mains voltage failure and overload, feedback of the switching status and the dimming value, Parameterizable switch-on and dimming behavior, time functions: switch-on, switch-off delay, staircase light switch with advance warning function, light scene operation, status display of the outputs via LED, operating hours counter, power failure longer than approx. 5 seconds leads to the dimming actuator being switched off. Depending on the parameter setting, the connected load is recalibrated after the power returns. Increasing the output power possible by connecting several outputs in parallel, power expansion possible through power additives (item no. ULZ 1755 REG), optional accessories: LED compensation module, item no.: KM LED 230 U, logic properties: logic gates, converter (conversion) , blocking element, comparator, limit switch, technical data, nominal voltage: AC 110 ... 230 V ~, mains frequency: 50/60 Hz, power loss: max. 7 W, standby power: approx. 0.16 W per channel, ambient temperature: -5 ... +45 °C, storage/transport temperature: -25 ... +70 °C, lamp loads, operating modes 'Universal', 'leading edge', 'LED leading edge', connected load 230 V per output, incandescent lamps: 20 ... 225 W, HV halogen lamps: 20 ... 225 W, If the operating mode ''leading edge'' or ''LED leading edge'' is set for incandescent lamps and HV halogen lamps, the operating mode decreases maximum connected load to 20 ... 210 W., Inductive transformers: 20 ... 210 VA, Inductive transformers with LV-LED: 20 ... 100 VA, Electronic transformers: 20 ... 210 W, Electronic transformers with LV- LED: 20 ... 100 W, HV LED lamps dimmable: typ. 1 ... 35 W, compact fluorescent lamps dimmable: typ. 20 ... 80 W, mixed loads, capacitive-inductive: not permitted, the connected load is Reduced to 110 V, the lamp loads are halved., For inductive transformers and inductive transformers with LV LEDs, the “LED phase-cutting edge” operating mode is not permitted., “Leading-edge phase-cutting” operating modes, “LED phase-cutting” operating modes, connected load 230 V per output, incandescent lamps: 20 ... 225 W, HV halogen lamps: 20 ... 225 W, electronic transformers: 20 ... 225 W, electronic transformers with LV LED: 20 ... 200 W, HV -LED lamps dimmable: typ. 1 ... 200 W, compact fluorescent lamps dimmable: typ. 20 ... 150 W, If the connected load is reduced to 110 V, the lamp loads are halved., Installation width: 72 mm (4 HP), KNX, KNX medium: TP 256, commissioning mode: S-mode, nominal voltage KNX: DC 21 ... 32 V SELV, current consumption KNX: 15 mA, connection, connection type: connection terminal, solid: 1 x 0.5 ... 4 mm² , fine-stranded without ferrule: 1 x 0.5 ... 4 mm², fine-stranded with ferrule: 1 x 0.5 ... 2.5 mm²