KNX blind/shutter actuator 12-fold, 230V AC TYM632C

KNX blind/shutter actuator 12-fold, 230V AC TYM632C – Hager – 3250616059528: Blind output 12-fold KNX 230V TYM632C bus system KNX, other bus systems without, mounting type REG, width in modular units 10, with bus coupling, local/manual operation, with LED display, number of inputs 0, switching current ohmic 4A, max. switching capacity 900W, Max. number of blind outputs 12, type of current AC, protection class (IP) IP20, roller shutter/blind actuator 12-fold KNX, 230V. Roller shutter/blind actuator REG with integrated bus coupler for controlling drives, potential-free closers and can be connected in multiple phases. 12 x roller shutter/blind control in up or down mode. The movement command UP/DOWN/Stop and the slat angle can be adjusted via the blind function. Percent control of the blind to move to a predefined position. The sun protection function can be used in conjunction with an outdoor sensor to control the brightness in each room. With alarm function to control the blinds in a defined position. Safety descent as long as the button is pressed. 64 scene functions per channel. Logic block for controlling the output depending on the result of a logical operation. Preset locking function, forced control. The device converts the bus information into corresponding commands. The outputs are switched via the system line from the inputs assigned to them. The device can be read with a diagnostic tool. With programming button and red programming LED, bus connection via bus terminal, switching channels via box terminals. With manual operation and LED switching status display as well as labeling options directly on the device. Note: The device can be programmed with the ETS (from version 4).