KNX button rocker 2f bk unprinted/arrows - KNX Bus coupler for bus system 5175005

KNX button rocker 2f bk unprinted/arrows - KNX Bus coupler for bus system 5175005 – Gira – 4010337090861: KNX button rocker 2f sw unprinted/arrows 5175005 Bus system KNX, other bus systems without, mounting type flush-mounted, fastening type claw/screw fastening, KNX button, rocker 2-fold unprinted arrow symbols matt blackFeatures: KNX button with integrated bus coupler. Integrated temperature sensor. Rocker or button function adjustable for each control surface. Control of up to four functions possible via the button function of the KNX button. Functions: switching, dimming, blinds, value transmitter, scene extension, 2-channel operation and controller extension. Switching: The command when pressing and/or releasing is adjustable (no reaction, switching on, switching off, switching). Dimming: The command when pressed, the time between switching and dimming, dimming in different stages, the telegram repetition after a long press and the sending of a stop telegram at the end of the press can be adjusted. Blind: The command when pressed and the operating concept can be adjusted. The operating concept can be adjusted for short and long actuation and slat adjustment times. Temperature measurement: Room temperature measurements by internal sensor, internal and wired remote sensor or internal and external sensor. Value transmitter: The functionality (1 byte, 2 byte, 3 byte or 6 byte value transmitter) and the value can be set. Scene extension: The functionality (without or with memory function) and the scene number can be set. 2-channel operation: By pressing a button, up to two telegrams can be sent to the KNX. The operating concept can be adjusted and the time for short and long operation can be adjusted. The functionality of the channels can be set separately from each other. Locking function for locking individual buttons or rockers.Functions of the status LED: Each status LED can be parameterized independently of the control surface. LED orientation lighting: For orientation, all LEDs can be permanently switched off or on, display the status of a separate communication object (ON, OFF, flashing) or switched on when any button is pressed and automatically switched off again after a delay time has elapsed. Status LED functions: always OFF, always ON, actuation display, telegram acknowledgment, status display, control via separate LED object, operating mode display, controller status display, presence status display and setpoint shift display. Color can be parameterized. The color selection is done either together for all status LEDs or separately for each status LED of the device. The status LEDs can either light up red, green or blue. The brightness of the status LED can be adjusted in five levels. With night reduction, the brightness of the status LED can be reduced at night via a communication object. In addition, a superimposed function can be enabled for each status LED, allowing a different color and display type to be set. Controller extension properties: External room temperature controllers can be controlled using the controller extension push-button function. Operating mode switching, forced operating mode, presence function and setpoint shift. Evaluation of the controller status via the status LED. Measurement of the room temperature with an internal sensor or optionally by generating a measured value of the internally measured temperature with an external temperature. Functions Color temperature control (from product database ver. 2.2): Type of communication object adjustable (brightness or color temperature). Type of communication object adjustable for brightness and color temperature (single object DPT 3.007 or combination object DPT 250.600). The command when pressed, the time between switching and dimming, dimming in different stages, the telegram repetition after a long press and the sending of a stop telegram at the end of the press can be set. Color control functions (from product database ver. 2.2): Type of color control adjustable ( Color circle cycle or brightness adjustment). Color space and color values adjustable (RGB W, HSV W). Type of communication object can be set for RGB W and HSV W (individual objects DPT 5.001 or combined object DPT 232.600 DPT 251.600). The command when pressed, the time between switching and color cycle brightness adjustment, the start value and the step size of the adjustment as well as the telegram repetition after a long press can be adjusted. Notes: KNX Data Secure compatible. Firmware updates are possible with the Gira ETS service app (additional software). When using Gira TX_44, use adapter frame IP20 and cover from System 55. Illuminated in accordance with the Workplace Ordinance (ArbStättV).