Roller lever for position switch LS-11S/L

Roller lever for position switch LS-11S/L – Eaton – 266116 – 4015082661168: Roller lever with position switch LS-11S/L Sensor width 31mm, sensor diameter 0mm, sensor height 61mm, sensor length 33.5mm, rated operational current Ie at AC-15, 24 V 6A, rated operational current Ie at AC-15, 125 V 6A, rated operational current Ie at AC-15, 230 V 6A, rated operational current Ie at DC-13, 24 V 3A, rated operational current Ie at DC-13, 125 V 0.8A, rated operational current Ie at DC-13, 230 V 0.3A , switching function snap-action contact, positive opening, number of safety-related auxiliary contacts 1, number of contacts as NC contacts 1, number of contacts as NO contacts 1, number of contacts as change-over contacts 0, version of the interface without, version of the interface for safety-related communication without, cuboid housing design, material of the housing plastic, coating housing others, design of the actuating element roller lever, alignment of the actuating element other, design of the electrical connection other, suitable for Sic safety functions, explosion protection category for gas without, explosion protection category for dust without, ambient temperature during operation 25 ... 70°C, degree of protection (IP) IP67, degree of protection (NEMA) 4X, position switch, basic function: position switch, safety position switch, Type code: LS(M)-..., range: roller lever, degree of protection: IP66, IP67, equipment: complete device, ambient temperature: -25 - +70 °C, design: EN 50047 form E, snap-action contact: yes, description: long, contact equipment S = normally open: 1 NO, contacts NC = normally closed: 1 NC, note: = safety function, through positive opening according to IEC/EN 60947-5-1, positive opening (ZW): yes, color of housing cover: yellow, housing: plastic, connection type: cage -Clamp, Cage-Clamp is a registered trademark of Wago Kontakttechnik, 32432 Minden., Accessories for the Cage-Clamp connection from Wago: Insertion bridge, grey, Wago order no. 264-402, standards and regulations: IEC/EN 60947