Position switch dome plunger, metal - Plunger switch IP67 LSM-11

Position switch dome plunger, metal - Plunger switch IP67 LSM-11 – Eaton – 266144 – 4015082661441: Position switch dome plunger, metal LSM-11 sensor width 31mm, sensor diameter 0mm, sensor height 61mm, sensor length 33.5mm, rated operational current Ie at AC-15, 24 V 6A, rated operational current Ie at AC-15, 125 V 6A , rated operational current Ie at AC-15, 230 V 6A, rated operational current Ie at DC-13, 24 V 3A, rated operational current Ie at DC-13, 125 V 0.8A, rated operational current Ie at DC-13, 230 V 0.3A, switching function Slow-action switching element, positive opening, number of safety-related auxiliary contacts 0, number of contacts as NC contacts 1, number of contacts as NO contacts 1, number of contacts as change-over contacts 0, version of the interface without, version of the interface for safety-related communication without, cuboid housing design, housing material Metal, coating of the housing, other, design of the actuating element, rounded plunger, alignment of the actuating element, other, design of the electrical connection, cable entry (metric sch), Suitable for safety functions, Explosion protection category for gas without, Explosion protection category for dust without, Ambient temperature during operation 25 ... 70°C, degree of protection (IP) IP67, degree of protection (NEMA) 4X, safety position switch, basic function: position switch , safety position switch, type identifier: LS(M)-..., range: rounded plunger, protection class: IP66, IP67, equipment: basic device, expandable, ambient temperature: -25 - +70 °C, design: EN 50047 form B, contact assembly S = NO contact: 1 NO, contact equipment NC = NC contact: 1 NC, note: = safety function, through positive opening according to IEC/EN 60947-5-1, positive opening (ZW): yes, color of housing cover: yellow, housing: metal, connection type: cage Clamp, Cage-Clamp is a registered trademark of Wago Kontakttechnik, 32432 Minden., Accessories for the Cage-Clamp connection from Wago: Insertion bridge, grey, Wago order no. 264-402, standards and regulations: IEC/EN 60947