Load shedding relay 6,7...39A RLR 1

Load shedding relay 6,7...39A RLR 1 – Doepke – 09980283 – 4014712076686: Load shedding relay RLR 1 rated voltage 400V, rated current 6.7 ... 39A, response current 3.1 ... 5.3A, max. release delay 20ms, max. continuous current 43A, number of NO contacts 0, number of NC contacts 1, Number of contacts as changeover contact 0, rated current (control contacts) 1A, max. switching voltage (control contacts) 400V, max. switching capacity (control contacts) 250VA, electrical service life (control contacts) 1000000 switching cycles, mechanical service life (control contacts) 100000000 switching cycles, max. electrical switching frequency 1800c/h , Type of voltage AC, type of mounting DIN rail, width in pitch units 1, installation depth 60mm, degree of protection (IP) IP40, load shedding relay switch off a connected consumer when another is switched on. You thus prevent current peaks by preventing the simultaneous operation of powerful consumers. The compact devices of the RLR series have a potential-free normally closed relay. The RLR 2 has an additional fall delay. Properties: Coil input up to 5.3 A, potential-free relay as NC contact up to 1 A, drop-out delay 0 (RLR 1) or 2 mains half-waves (RLR 2), module width only 1 module (17.5 mm), protection class IP 20, type of installation: quick fastening on DIN rail, any installation position, areas of application: The load shedding relays can be used wherever the simultaneous operation of powerful electrical loads is undesirable and a long-term load can be switched off. e.g. B. for night heating and instantaneous water heaters.