Float switch with 10m cable 09 921 009

Float switch with 10m cable 09 921 009 – Doepke – 4014712063075: Float switch with 10m cable 09 921 009 Suitable for rainwater, Suitable for cooling water, Suitable for condensed water, Suitable for glycol, measuring range 0mm, differential range/switching hysteresis 0mm, immersion depth 0mm, horizontal installation, transducer/sensor type other, type of installation hanging above the shaft, material Float plastic, other connection, max. voltage of the contacts 250V, max. contact load 10A, max. medium temperature (continuous operation) 50°C, max and control e.g. B. pumps or trigger an alarm at defined levels. The switches in this series can monitor up to two different limit values. If the adjustable fill level changes, the contacts open or close. Any liquid level can be adjusted using an optionally available weight on the float cable. The switching hysteresis is fixed. A robust, impact-resistant housing protects the switching contact. Connection cable and float form a hermetically sealed unit. The ''L/F'' version can both fill and drain. Devices of variant ''G'' have a rubber cable. Standard devices are suitable for non-aggressive liquids. Properties: high switching reliability due to low-wear ball guide, easy adjustment of the float position using an optionally available counterweight, housing material made of non-toxic PP, highly flexible synthetic rubber connecting cable, areas of application: The most important areas of application are pumps and drainage systems, waste water or the chemical industry and everywhere. where reliable point level detection of liquids is required. Notes: not suitable for DC and low voltage, not suitable for use in drinking water