Rubber cable H07RN-F - Power cable < 1kV, fix installation Titanex 5G 2,5

Rubber cable H07RN-F - Power cable < 1kV, fix installation Titanex 5G 2,5 – Diverse – 10055571: Titanex 5G 2.5 S H07RN-F rubber cable, nominal conductor cross-section 2.5mm², conductor class Kl.5 = fine-stranded, number of cores 5, material of the core insulation rubber, specification core insulation rubber - ethylene-propylene rubber (EPR), core -Identification color, protective conductor, specification sheath material rubber - ethylene propylene rubber (EPR), sheath color black, flame retardant no, round shape, outer diameter approx. 17mm, perm. External cable temperature during assembly/handling -25 ... 55°C, perm. Cable external temperature after assembly without vibration -25 ... 55°C, nominal voltage U0 450V, nominal voltage U 700V, These cables owe their robustness to the exceptional quality of their filling jacket made of synthetic elastomer, which makes them suitable for use under high demands such as on construction sites or in suitable for the steel industry. The protective insulation made from a special elastomer can withstand difficult operating conditions in an industrial environment without damage. In addition, the cables are suitable for hard wiring machines where vibrations can cause the conductors to break at connection points. Special measures are often required during production to ensure that the cables can withstand special load requirements such as spinning movements. Suitable for flexible connections and for powering devices operated in water, especially submersible pumps. Heavy-duty flexible rubber hose assemblies are designed for medium mechanical stress in dry, damp or wet rooms as well as outdoors and on farms. They are used for devices used in commercial operations such as boilers, heating plates or hand lamps, for power tools such as drills, circular saws or DIY devices as well as for transportable engines or machines on construction sites. In addition, the cables can be used for permanent surface-mounted installations in temporary buildings and living barracks. They are suitable for direct installation in components and mechanical components of machines such as elevators or cranes. The cables may be operated with an operating voltage of up to 1000 V AC or a DC voltage of up to 750 V to earth when installed in a protected, fixed manner in pipes or devices and as a rotor connecting cable for motors. When used in rail vehicles, the operating direct voltage may be up to 900 V to earth. Laying in potentially explosive areas according to DIN VDE 0165 is permitted.