KNX switching actuator 1-fold with 2 binary inputs 105900

105900 4010337010678 EAN/GTIN DE 59229780 WEEE

Our best price
$119.56 incl. VAT ($0.00)
$187.26 (-36.15% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Switch actuator 1-fold 105900 bus system KNX, other bus systems without, mounting type... more
KNX switching actuator 1-fold with 2 binary inputs 105900 – Gira – 4010337010678: Switch actuator 1-fold 105900 bus system KNX, other bus systems without, mounting type flush-mounted, number of binary inputs 2, max. switching capacity 2500W, output power 2500W, max. number of switching outputs 4, max. switching current 16A, protection class (IP) IP20, KNX switch actuator 1-fold 16 A Flush-mounted Features: Free assignment of the switching, dimming, blinds and value transmitter functions to the inputs. Blocking object for blocking individual inputs. Behavior on bus voltage recovery can be configured separately for each input. Telegram Rate Limit. Switching function: two independent switching objects are available for each input and can be activated individually, command can be set independently for a rising and falling edge (ON, OFF, TOGGLE, no reaction). Dimming function: One-surface and two-surface operation, time between dimming and switching and dimming increment adjustable, telegram repetition and stop telegram possible. Blind function: Command can be set with a rising edge (no function, UP, DOWN, TOGGLE), parameterizable operating concept (Step - Move - Step or Move - Step), time between short and long-term operation can be set, slat adjustment time can be set. Value transmitter and light scene extension function: Edge (button as NO contact, button as NC contact, switch) and value can be configured for an edge, value adjustment for the button by pressing and holding the button for the value transmitter is possible, light scene extension unit with memory function, it is also possible to save the scene without calling it up beforehand. Switch actuator 1-fold flush-mounted with two binary inputs. Floating contacts can be connected to the two binary inputs. The two inputs can perform different functions or be blocked independently of each other. Input ''1'' is factory-assigned to the switching actuator so that it can be operated without programming. Output configurable as normally open or normally closed. Selection of the preferred position in the event of bus voltage failure and recovery. Switch-on or switch-off delay or timer function adjustable. Output with three objects: switching, feedback and additional function (link, blocking function or forced position). Feedback object invertible. Notes: For mounting in device box (recommendation electronic box from Kaiser). Flush-mounted, Kaiser Order No.: 1068-02, cavity wall, Kaiser Order No.: 9062-94, halogen-free, Kaiser Order No.: 9062-74. The outputs are connected via a flexible cable approx. 20 cm long. The binary inputs and the KNX bus are connected via a 6-wire connection cable, approx. 30 cm long, which can be extended to a maximum of 5 m. VDE approval according to EN 60669-1, EN 60669-2-1.
... more
Bus system KNX yes
Bus system KNX radio no
Bus system radio bus no
Bus system LON no
Bus system Powernet no
Other bus systems without
Mounting Flush
On-site / manual operation no
With LED display no
Number of digital inputs 2
Max. Switching capacity 2500 W
Output 2500 W
Suitable for C-load no
Max. Number of switching outputs 4
Max. Switching current 16 A
Different phases connectable no
With bus coupling no
Modular expansion option no
IP protection) IP20

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "KNX switching actuator 1-fold with 2 binary inputs 105900"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.