DALI radio control unit - Light control unit for bus system 8-ch FM STD 8 UP

FM STD 8 UP 4011377086715 EAN/GTIN DE 64244154 WEEE

Our best price
$109.39 incl. VAT ($0.00)
$161.19 (-32.14% RRP***)

15-16 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Radio control unit DALI FM STD 8 UP bus system radio bus, other bus systems eNet, radio... more
DALI radio control unit - Light control unit for bus system 8-ch FM STD 8 UP – Jung – 4011377086715: Radio control unit DALI FM STD 8 UP bus system radio bus, other bus systems eNet, radio bidirectional, mounting type flush-mounted, with bus coupling, with LED display, max. switching power 1380W, number of outputs 8, max. control current 24mA, new system function: fully encrypted radio transmission ( AES-CCM) from eNet server software version 2.0 Intended use Switching and brightness adjustment for lights with DALI interface Operation with suitable eNet radio transmitters Installation in a device box with dimensions according to DIN 49073 in combination with a suitable cover Installation in a surface-mounted housing or installation adapter (item no . FM-EBG) for false ceilings Product features Joint operation of all connected DALI ballasts, broadcast Electronic short-circuit protection of the DALI supply with permanent switch-off after 8 seconds Electronic over-temperature protection of the DALI supply with latching DALI supply for a maximum of 12 participants Parallel connection of up to 6 DALI -Control devices with the possibility of supplying up to 72 participants Switch-on brightness can be saved permanently Minimum brightness can be saved permanently Scene operation possible Status display with LED Status feedback to radio transmitter DALI ballasts can be switched with the Prog button Can be set with eNet server: Maximum brightness Dimming speed On/off delay Dimming up/down ramp Switch-off advance warning Operating locks Permanent on, permanent off Hotel function Follow-up time Additional functions with eNet server: Fully encrypted radio transmission (AES-CCM) from eNet server software version 2.0 Update of the device software Repeater function Read out error memory Rated voltage: AC 230 V ~, 50/60 Hz Power consumption: max. 2 W Ambient temperature: -25 ... +70 °C DALI system voltage: DC 16 V Output current: max. 24 mA Number of DALI participants: max. 12 Power reduction Number of DALI participants above 45 °C: max. 8 Number of parallel control devices: max 6 Connection type: Screw terminals solid: 1 x 0.75 ... 4 mm2 fine-wire with ferrule: 1 x 0.75 ... 2.5 mm2 Dimensions (Ø x H): 53 x 28 mm Radio frequency: 868.0 . .. 868.6 MHz Transmission power: max. 20 mW Transmission range in open field: typ. 100 m Receiver category: 2
... more
Bus system KNX no
Bus system KNX radio no
Bus system radio bus yes
Bus system LON no
Bus system Powernet no
Other bus systems eNet
Radio bidirectional yes
Mounting Flush
With bus coupling yes
Extension input no
On-site / manual operation no
With LED display yes
Max. Switching capacity 1380 W
Number of exits 8th
Max. Control current 24 mA

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "DALI radio control unit - Light control unit for bus system 8-ch FM STD 8 UP"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.