Voltage tester

In any case, when you work on electrical installations or deal with electricity, you are always careful to take all the safety precautions in place to avoid accidents. And before you put your hands on a live component, check whether it is live or not. There are different ways and tools to do this. A single-pole voltage tester, also known as a phase tester or lying pen, is often sufficient for a simple check. This is a high-value resistor and glow lamp built into a pen or screwdriver. To measure, the tip of the device is held against the conductor to be tested and the rear end is touched with the finger. This closes the circuit to earth and the glow lamp lights up if the tested conductor is live. For more accurate measurement results, the use of two-pole voltage testers is recommended. They consist of two test probes that are connected to the test object and, depending on the model, indicate the presence of voltage and the corresponding voltage level on a scale. We offer you both model variants here in our eibabo shop.

Catalogue content:


In this eibabo® catalogue Measuring instruments and tester > Voltage tester you will find items from the following product groups:

Item overview:

  • Acoustic universal test device
  • Combi check
  • Continuity tester
  • Digital gauge
  • Digital voltage tester
  • Double pole voltage tester
  • Gauge
  • Load tester
  • Master check
  • Meter run tester
  • Moving coil meter tester
  • Moving coil voltage tester
  • Multi check
  • Non-contact voltage tester
  • Phase checker
  • Phase indicator
  • Phase sequence indicator
  • Safety voltage tester
  • SCHUKO test device
  • Socket tester
  • Test device
  • Tester
  • Universal voltage tester
  • Voltage detector
  • Voltage tester
  • Voltage tester screwdriver
  • Voltage/phase sequence indicator
  • Voltmeter


from the following manufacturers:

Manufacturer overview catalogue Voltage tester:

  • Benning
  • Chauvin
  • Cimco
  • Dehn
  • Elka
  • Fluke
  • GMC-I Messtechnik
  • Gossen Metrawatt
  • Klauke
  • Kleinhuis
  • Phoenix
  • PROTEC.class
  • Scharnberger+Has.
  • Sirena
  • WAGO
  • Weidmüller
  • Wera
  • Wiha


 
In any case, when you work on electrical installations or deal with electricity, you are always careful to take all the safety precautions in place to avoid accidents. And before you put your hands... read more »
Close window
Voltage tester
In any case, when you work on electrical installations or deal with electricity, you are always careful to take all the safety precautions in place to avoid accidents. And before you put your hands on a live component, check whether it is live or not. There are different ways and tools to do this. A single-pole voltage tester, also known as a phase tester or lying pen, is often sufficient for a simple check. This is a high-value resistor and glow lamp built into a pen or screwdriver. To measure, the tip of the device is held against the conductor to be tested and the rear end is touched with the finger. This closes the circuit to earth and the glow lamp lights up if the tested conductor is live. For more accurate measurement results, the use of two-pole voltage testers is recommended. They consist of two test probes that are connected to the test object and, depending on the model, indicate the presence of voltage and the corresponding voltage level on a scale. We offer you both model variants here in our eibabo shop.

Catalogue content:


In this eibabo® catalogue Measuring instruments and tester > Voltage tester you will find items from the following product groups:

Item overview:

  • Acoustic universal test device
  • Combi check
  • Continuity tester
  • Digital gauge
  • Digital voltage tester
  • Double pole voltage tester
  • Gauge
  • Load tester
  • Master check
  • Meter run tester
  • Moving coil meter tester
  • Moving coil voltage tester
  • Multi check
  • Non-contact voltage tester
  • Phase checker
  • Phase indicator
  • Phase sequence indicator
  • Safety voltage tester
  • SCHUKO test device
  • Socket tester
  • Test device
  • Tester
  • Universal voltage tester
  • Voltage detector
  • Voltage tester
  • Voltage tester screwdriver
  • Voltage/phase sequence indicator
  • Voltmeter


from the following manufacturers:

Manufacturer overview catalogue Voltage tester:

  • Benning
  • Chauvin
  • Cimco
  • Dehn
  • Elka
  • Fluke
  • GMC-I Messtechnik
  • Gossen Metrawatt
  • Klauke
  • Kleinhuis
  • Phoenix
  • PROTEC.class
  • Scharnberger+Has.
  • Sirena
  • WAGO
  • Weidmüller
  • Wera
  • Wiha
Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to

1 From 8
No results were found for the filter!
RECOMMENDED
3D
Benning - DUSPOL digital - Voltage tester DUSPOL digital
$112.07 incl. VAT ($0.00)

*

Voltage tester
Benning
| DUSPOL digital
RECOMMENDED
3D
Fluke - 2100-BETA - Voltage tester 12...690V 2100-BETA
$117.04 incl. VAT ($0.00)

*

Voltage tester 12...690V
Fluke
| 2100-BETA
RECOMMENDED
3D
Benning - DUSPOL analog - Voltage tester 12...1000V DUSPOL analog
$62.08 incl. VAT ($0.00)

*

Voltage tester 12...1000V
Benning
| DUSPOL analog
RECOMMENDED
3D
Weidmüller - DIGI-CHECK PRO - Voltage tester 0,3...690V DIGI-CHECK PRO
$83.84 incl. VAT ($0.00)

*

plus shipping
($134.83 RRP***)
Voltage tester 0,3...690V
Weidmüller
| DIGI-CHECK PRO
RECOMMENDED
3D
Fluke - Fluke 1AC E1 II - Voltage tester 200...1000V Fluke 1AC E1 II
$45.85 incl. VAT ($0.00)

*

Voltage tester 200...1000V
Fluke
| Fluke 1AC E1 II
RECOMMENDED
3D
Fluke - LVD2 - Voltage tester Volt Light LVD2
$62.91 incl. VAT ($0.00)

*

Voltage tester Volt Light
Fluke
| LVD2
RECOMMENDED
3D
Cimco - 11 1280 - Voltage tester 100...250V 11 1280
$1.55 incl. VAT ($0.00)

*

plus shipping
($3.23 RRP***)
Voltage tester 100...250V
Cimco
| 11 1280
RECOMMENDED
3D
Benning - BENNING SDT 1 - Socket tester with finger contact - Voltage tester BENNING SDT 1
$53.63 incl. VAT ($0.00)

*

Socket tester with finger contact - Voltage tester
Benning
| BENNING SDT 1
RECOMMENDED
3D
Fluke - 2100-GAMMA - Voltage tester 12...1200V 2100-GAMMA
$143.46 incl. VAT ($0.00)

*

Voltage tester 12...1200V
Fluke
| 2100-GAMMA
RECOMMENDED
3D
Fluke - 2100-ALPHA - Voltage tester 12...690V 2100-ALPHA
$83.16 incl. VAT ($0.00)

*

Voltage tester 12...690V
Fluke
| 2100-ALPHA
RECOMMENDED
3D
Cimco - 11 1288 - Voltage tester 100...250V 11 1288
$4.85 incl. VAT ($0.00)

*

plus shipping
($6.67 RRP***)
Voltage tester 100...250V
Cimco
| 11 1288
RECOMMENDED
3D
Benning - DUSPOL expert - Voltage tester 12...1000V DUSPOL expert
$72.08 incl. VAT ($0.00)

*

Voltage tester 12...1000V
Benning
| DUSPOL expert
1 From 8
Viewed from you