KNX power bus coupler 6120/13

6120/13 2CKA006120A0071 4011395102268 EAN/GTIN DE 91945327 WEEE

Our best price
$107.49 incl. VAT ($0.00)
$158.53 (-32.2% RRP***)

4-5 days* (USA)

Safety and hazard information
Please note that electrotechnical work may only be carried out by qualified electricians or under their guidance and supervision. Observe any deviating country-specific electrical installation standards and regulations and seek advice from a local electrician.In addition, observe more current safety instructions and regulations for the products on the manufacturer's side or the product descriptions and installation instructions on the manufacturer's side.

Devices with a connected load of > 380V/400V require a heavy current connection and may only be connected by an approved electrical company. Devices with a power rating > 12kW require the approval of your grid operator (Germany, other countries may differ).
read more
show less
Power bus coupler UP 6120/13 bus system KNX, other bus systems without, type of installation... more
KNX power bus coupler 6120/13 – Busch Jaeger – 2CKA006120A0071 – 4011395102268: Power bus coupler UP 6120/13 bus system KNX, other bus systems without, type of installation flush-mounted, number of connections sensor/actuator 1, type of attachment with screw, for Busch-priOn® basic support 1x, 2x and 3x. Voltage supply via separate plug-in terminals, eg yellow/white wire pair of the bus line. KNX connection exclusively for bus communication. Connection is via plug-in terminal on the device.
... more
Bus system KNX yes
Bus system KNX radio no
Bus system radio bus no
Bus system LON no
Bus system Powernet no
Other bus systems without
Mounting Flush
Width in division units 1
Number of connections sensor / actuator 1
Mounting Fastening with screw
Min. depth of the device socket 33 mm

Rate item

(0 reviews)
Read, write and discuss reviews... more
Customer review for "KNX power bus coupler 6120/13"
Write a review
Evaluations will be activated after verification.
Please enter these characters in the following text field.

The fields marked with * are required.